With a little lapse of attention while printing our Skull Succulent Planters, we had the temperature a little too high and they ended up fusing together. Instead of three planters coming out we had one plus a conjoined skull. While we threw out the manual already, we do remember a warning that this could happen. Oh well. Our failure is everyone else's gain as we have no choice but to sell these oddities or else we will just be dwelling in our overwhelming shame from the simple mistake.
* Plants are not included
Size & Materials
The size of the skull is approximately 100x110x73mm (3.93 x 4.33 x 2.87 inches) with a volume of 180ml (3/4 cup) and will comfortably house a small to medium sized succulent. There is a 5mm (1/5") drainage hole in the bottom rear of the planter. Layer by layer this skull is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just about 16 hours to print each planter.
Looking for another size, style, or something more unique and customized?
🌱 Welcome to the Cursed By Design Garden Centre!
🌱 SUCCULENT / FIST SIZED
🌿 Skull 💀: https://etsy.me/2VuC8s3
🌿 Horned Skull 😈: https://etsy.me/3g6G75G
🌿 Conjoined Skull 👁️: https://etsy.me/2Zo5IAA
🌿 Cauldron 🥘: https://etsy.me/2BT4y7Q
🌿 Coffin ⚰️: https://etsy.me/2Aljz28
🌿 Casket ⚰️: https://etsy.me/2NI7Ttq
🌱 LARGE PLANTER / HEAD SIZED
🌿 Skull 💀: https://etsy.me/3eMsdFF
🌿 Conjoined Skull 👁️: https://etsy.me/2BVzkNm
🌿 Cauldron 🥘: https://etsy.me/3ihfInS
🌿 Plantagram ⛧: https://etsy.me/3eKYzAT
🌱 GARDEN MARKING ACCESSORIES
🌿 Custom Grave Stones 🪦: https://etsy.me/38cLMEI
🌿 Custom Bat Stakes 🦇: https://etsy.me/38chdPD
🌿 Custom Crow Stakes 🦅: https://etsy.me/3geqt8m
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.
FREE LOCAL PICKUP IN TORONTO
Enter coupon code TORONTO at checkout and you will be sent the local pickup address in the Cabbagetown - Leslieville - Regent Park - Cork Town - Distillery District area of Toronto, Ontario.
3-7 business days
I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 14 days of delivery
Ship items back to me within: 30 days of delivery
Request a cancellation within: 12 hours of purchase
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Our 3D printed products are made from PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch and sugarcane. Our Toronto-based supplier manufactures the materials in Canada using food safe certified raw materials and is spooled on 100% recycled cardboard spools. Our paper products are made using Sustainable Forestry Initiative (SFI) or Forest Stewardship Council (FSC) certified cover stock made in the USA.
It all gets designed and created in our highrise home in the east end of downtown Toronto. Our living room is our design studio and packaging centre, our dining room is our printing and cutting room, and our guest bedroom is our 3D printing and storage room.
Where/when we can, we try to have at least a little stock of our most common items. In those cases we ship either next day or, if you order at the right time, the same day. Everything else is made when the order is placed. It can take a day to a week depending on your order.
We ship 5 days a week using a service called ChitChats. This allows us to have international tracking at regular non-tracked postal rates. To Canada, it is normal shipping. To the US, it is brought across the border and shipped through USPS so it is normal shipping times plus a day or two to get across the border. To international addresses there are two options, untracked (which is actually tracked) takes anywhere from 4-75 days through Ascendia and tracked (also tracked) ships through USPS International which is faster but more expensive.
Of course you can and we would love to see you! We are in the Leslieville, Cabbagetown, Corktown, Riverdale side of the city and if you use coupon code TORONTO then it will waive the shipping charge and we will let you know where you can pick it up from. We are available basically 24 hours a day -- either at our "day job" office or home which are only 2 blocks from each other.
We sure do! We try to do 6-12 a year throughout the Toronto, Hamilton, and London areas. From the Punk Rock Flea Market to Bazaar of the Bizarre to Geeky Craftoriums, we try to hit as many as our schedule permits. Keep tabs on our latest upcoming events at https://www.cursedbydesign.com/blogs/news
On the production side, there are no delays -- we buy in bulk from a Canadian supplier and usually stock at least 6 months worth of supplies. On the shipping side, there are delays depending on where you are ordering from. The mail system is overwhelmed with everything going on, so packages are moving a lot slower. We are still getting your items to the post office right away, but then it slows down from there. Canada Post also does not guarantee any delivery speeds at the moment, so choosing a faster method might not help get an item to you faster.
Jan 16, 2022
Jan 4, 2022
Dec 13, 2021
so in love! thank you!
Nov 19, 2021
Came quick and is very pretty!
Nov 17, 2021
Over the moon! Product exceeded expectations. I absolutely adore both printed skulls. The only bummer is that I bought these as a gift and I can't keep them.