Casket Succulent Planter

Casket Succulent Planter

$15.83




If you are someone that is always killing plants, now you can already have them laid to rest in one of our casket succulent planters. Being wider than they are deep you can have a few different varieties of plants that you will eventually let die or you can make into an unkillable zen garden with sand and stones. Don't like plants or things that are zen? Fill this casket up with markers, makeup brushes, jewelry, or anything else that has been rolling all around and falling under your dresser for years. Bury it at an angle and it would even make a great hide for a lizard or gecko. So many uses and so few excuses to not get a casket box today!
* Plants and other decorations are not included

Size & Materials
The size of the casket is approximately 76x177x44mm (3.00 x 6.97 x 1.73 inches) will comfortably house two or three small to medium sized succulent. You can choose to have a 5mm (1/5") drainage hole in the bottom rear. Layer by layer this skull is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes about 9 hours to print each planter.

Looking for another size, style, or something more unique and customized?
🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿
🌱 Welcome to the Cursed By Design Garden Centre!
🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿
🌱 SUCCULENT / FIST SIZED
🌿 Skull πŸ’€: https://etsy.me/2VuC8s3
🌿 Horned Skull 😈: https://etsy.me/3g6G75G
🌿 Conjoined Skull πŸ‘οΈ: https://etsy.me/2Zo5IAA
🌿 Cauldron πŸ₯˜: https://etsy.me/2BT4y7Q
🌿 Coffin ⚰️: https://etsy.me/2Aljz28
🌿 Casket ⚰️: https://etsy.me/2NI7Ttq
🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿
🌱 LARGE PLANTER / HEAD SIZED
🌿 Skull πŸ’€: https://etsy.me/3eMsdFF
🌿 Conjoined Skull πŸ‘οΈ: https://etsy.me/2BVzkNm
🌿 Cauldron πŸ₯˜: https://etsy.me/3ihfInS
🌿 Plantagram ⛧: https://etsy.me/3eKYzAT
🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿
🌱 GARDEN MARKING ACCESSORIES
🌿 Custom Grave Stones πŸͺ¦: https://etsy.me/38cLMEI
🌿 Custom Bat Stakes πŸ¦‡: https://etsy.me/38chdPD
🌿 Custom Crow Stakes πŸ¦…: https://etsy.me/3geqt8m
🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿🌿

Disclaimer
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.

FREE LOCAL PICKUP IN TORONTO
Enter coupon code TORONTO at checkout and you will be sent the local pickup address in the Cabbagetown - Leslieville - Regent Park - Cork Town - Distillery District area of Toronto, Ontario.a

Shipping from Canada

Processing time

2-6 business days

Estimated shipping times

  • Canada : 2 - 8 business days
  • United States : 4 - 8 business days
  • Europe : 1 - 3 weeks
  • Australia, New Zealand and Oceania : 2 - 4 weeks

I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.

Customs and import taxes

Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Payment Options

Secure options
  • Accepts Etsy gift cards

Returns & Exchanges

I gladly accept returns and cancellations

Just contact me within: 14 days of delivery

Ship items back to me within: 30 days of delivery

Request a cancellation within: 12 hours of purchase

I don't accept exchanges

But please contact me if you have any problems with your order.

Conditions of return

Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

Frequently Asked Questions

Are you really making plastic products in this day and age?

The "plastic" we use for our 3D printed goods is not oil based. It is rather a thermoplastic aliphatic polyester derived from renewable resources -- typically made from fermented plant starch such as from corn, cassava, sugarcane or sugar beet pulp. You can read more about it here: https://en.wikipedia.org/wiki/Polylactic_acid

What about your environmental impact?

We try to limit our waste and energy use as much as possible. For our paper and vinyl products, all waste materials and recycled with the city. All our 3D printed waste either gets ground down into the smallest pieces we can and then either melted down into fun decor items or sent to a facility that turns 3D printed waste into new rolls of filament. The filament we use also comes without the wasteful ABS plastic spool which saves about 200 grams of oil-based plastic waste per 1kg of material. All of our machines are set to use as little energy as possible; turning off heating and running in power saving mode where applicable.

Where do you make all your wickedly awesome stuff?

It all gets designed and created in our highrise home in the east end of downtown Toronto. Our living room is our design studio and packaging centre, our dining room is our printing and cutting room, and our guest bedroom is our 3D printing and storage room.

How long does it take to ship my order of that awesomely wicked stuff?

Where/when we can, we try to have at least a little stock of our most common items. In those cases we ship either next day or, if you order at the right time, the same day. Everything else is made when the order is placed. It can take a day to a week depending on your order.

How do you ship and how long will it take?

We ship 5 days a week using a service called ChitChats. This allows us to have international tracking at regular non-tracked postal rates. To Canada, it is normal shipping. To the US, it is brought across the border and shipped through USPS so it is normal shipping times plus a day or two to get across the border. To international addresses there are two options, untracked (which is actually tracked) takes anywhere from 4-75 days through Ascendia and tracked (also tracked) ships through USPS International which is faster but more expensive.

I live in Toronto too! Can I just pick it up from you instead of paying for shipping?

Of course you can and we would love to see you! We are in the Leslieville, Cabbagetown, Corktown, Riverdale side of the city and if you use coupon code TORONTO then it will waive the shipping charge and we will let you know where you can pick it up from. We are available basically 24 hours a day -- either at our "day job" office or home which are only 2 blocks from each other.

Do you do markets as well where I can see and touch all of the things?

We sure do! We try to do 6-12 a year throughout the Toronto, Hamilton, and London areas. From the Punk Rock Flea Market to Bazaar of the Bizarre to Geeky Craftoriums, we try to hit as many as our schedule permits. Keep tabs on our latest upcoming events at https://www.cursedbydesign.com/blogs/news

Are there any delays due to the pandemic?

On the production side, there are no delays -- we buy in bulk from a Canadian supplier and usually stock at least 6 months worth of supplies. On the shipping side, there are delays depending on where you are ordering from. The mail system is overwhelmed with everything going on, so packages are moving a lot slower. We are still getting your items to the post office right away, but then it slows down from there. Canada Post also does not guarantee any delivery speeds at the moment, so choosing a faster method might not help get an item to you faster.

Reviews (7)

Average:

Perfect! So many amazing details.



It's just like the picture and it's perfect. I love it so much. Thank you. :)


this little guy was smaller than I expected, but still amazing quality and shipping was fast as well so I can not be mad! I still love him and will use him for sure.


I love this! I actually keep all of my apple computer attachments/cords in this near my desk, so perfect.


Legal imprint