The size of the SMALL is 137.5x137.5x245mm (5.4 x 5.4 x 1.0 inches) and weighs 120g. Perfect for trees from mini up to 6 feet tall.
The size of the LARGE is 177x177x245mm (7.0 x 7.0 x 1.0 inches) and weighs 190g. Perfect for trees over 6 feet tall.
There is a 17x20mm hole right through to mount on a tree in either rotation.
Materials & Process
Layer by layer this tree topper is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just over 8 hours for the small and over 13 hours for the large to print each star.
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.
FREE LOCAL PICKUP IN TORONTO
Enter coupon code TORONTO at checkout and you will be sent the local pickup address in the Cabbagetown - Leslieville - Regent Park - Cork Town - Distillery District area of Toronto, Ontario.
4-10 business days
I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 14 days of delivery
Ship items back to me within: 30 days of delivery
Request a cancellation within: 12 hours of purchase
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
The "plastic" we use for our 3D printed goods is not oil based. It is rather a thermoplastic aliphatic polyester derived from renewable resources -- typically made from fermented plant starch such as from corn, cassava, sugarcane or sugar beet pulp. You can read more about it here: https://en.wikipedia.org/wiki/Polylactic_acid
We try to limit our waste and energy use as much as possible. For our paper and vinyl products, all waste materials and recycled with the city. All our 3D printed waste either gets ground down into the smallest pieces we can and then either melted down into fun decor items or sent to a facility that turns 3D printed waste into new rolls of filament. The filament we use also comes without the wasteful ABS plastic spool which saves about 200 grams of oil-based plastic waste per 1kg of material. All of our machines are set to use as little energy as possible; turning off heating and running in power saving mode where applicable.
It all gets designed and created in our highrise home in the east end of downtown Toronto. Our living room is our design studio and packaging centre, our dining room is our printing and cutting room, and our guest bedroom is our 3D printing and storage room.
Where/when we can, we try to have at least a little stock of our most common items. In those cases we ship either next day or, if you order at the right time, the same day. Everything else is made when the order is placed. It can take a day to a week depending on your order.
We ship 5 days a week using a service called ChitChats. This allows us to have international tracking at regular non-tracked postal rates. To Canada, it is normal shipping. To the US, it is brought across the border and shipped through USPS so it is normal shipping times plus a day or two to get across the border. To international addresses there are two options, untracked (which is actually tracked) takes anywhere from 4-75 days through Ascendia and tracked (also tracked) ships through USPS International which is faster but more expensive.
Of course you can and we would love to see you! We are in the Leslieville, Cabbagetown, Corktown, Riverdale side of the city and if you use coupon code TORONTO then it will waive the shipping charge and we will let you know where you can pick it up from. We are available basically 24 hours a day -- either at our "day job" office or home which are only 2 blocks from each other.
We sure do! We try to do 6-12 a year throughout the Toronto, Hamilton, and London areas. From the Punk Rock Flea Market to Bazaar of the Bizarre to Geeky Craftoriums, we try to hit as many as our schedule permits. Keep tabs on our latest upcoming events at https://www.cursedbydesign.com/blogs/news
On the production side, there are no delays -- we buy in bulk from a Canadian supplier and usually stock at least 6 months worth of supplies. On the shipping side, there are delays depending on where you are ordering from. The mail system is overwhelmed with everything going on, so packages are moving a lot slower. We are still getting your items to the post office right away, but then it slows down from there. Canada Post also does not guarantee any delivery speeds at the moment, so choosing a faster method might not help get an item to you faster.
Feb 16, 2021
Great quality but shipping took a while probably due to covid things and the holidays
Jan 20, 2021
I bought this as a gift for my sister and her husband, and they love it so much. Instead of using it as a tree topper, they’ve mounted it above their altar at home! It’s good, strong quality and an awesome, unique gift!
Jan 19, 2021
Jan 8, 2021